Log in
Seblog.nl

Seblog.nl

Over Apple Workouts exporteren naar Strava

Als een mens langs een kanaal hardloopt, maar hij heeft geen hardloophorloge om, bestaat die hardloopsessie dan wel?

Sinds ik een nieuwe iPhone heb doet de Strava-app voor mijn Apple Watch het niet meer. Ik heb 'm al diverse keren opnieuw geïnstalleerd, ingelogd, uitgelogd, opnieuw gekoppeld, maar hij blijft in hetzelfde "meld je aan!"-scherm hangen. Anderhalve week geleden ben ik daardoor hartslaggegevens 'verloren' tijdens een 5k wedstrijd hier in de buurt. (Had ik maar meer moeten trainen, was ik er eerder achter gekomen.) Ik dacht dat ik het gefixt had, maar toen ik net weer een rondje wilde maken bleek hij nog altijd in die stand te zitten.

Dus ik terug naar huis.

Ik ben misschien een beetje te obsessief met het meten van mijn hardlooprondjes, maar ik wil ze gewoon opslaan. Hardlooprondjes is momenteel het enige data-type dat ik nog niet op mijn weblog post (al zou ik ze als privéposts houden denk ik). Maar ik deel ze allemaal braaf op en met de site Strava.

Strava is een hele fijne site om achteraf naar je hardloopdata te kijken. Er zijn heel veel overzichtjes, mooie kaartjes, en als je ze extra geld geeft maken ze ook nog leuke grafiekjes voor je. Voor opnemen moet je echter totaal niet bij hen zijn: zelfs als de Apple Watch-app het had gedaan, doet hij nog altijd onder voor de software van de TomTom Runner 2 (RIP).

De Apple Watch heeft zelf dus ook een native app om workouts mee vast te leggen, maar Strava importeert dus niet vanaf de HealthKit app. Ik roep dus al een tijdje te pas en te onpas dat ik me nog eens ga verdiepen in Swift en programmeren voor de Apple Watch, om zelf dan maar een app te maken waarmee ik kan hardlopen zoals ik met de TomTom kon.

Maar, tijdens een vurige zoektocht over het internet, in hardloopkleding en al, vond ik HealthFit, een app waarmee je wél je Apple Workouts naar Strava kan overzetten. Ik heb er net een rondje mee hardgelopen en hoewel ik nog niet álle functies van de TomTom terugzie, komt dit toch wel verdraaid dichtbij. En het ziet er sowieso fancyer uit met die kleurtjes.

Bovendien heeft de app nog veel meer export-targets, waaronder iCloud Drive en e-mail. Dus nu zit ik met binary pattern-matching in Elixir te kijken wat ik allemaal met een .fit bestand kan aanvangen. Wie weet ooit nog eens hardlooprondjes hier!

‪Just had a nice moment of “hey I know nothing about z-index, but I know it does not work the way you think it works”, and then being able to help someone out by Googl’ing up this MDN page.‬

‪You don’t need to know everything, just remember where the weird things‬ are.

‪There is a bit of a design flaw in Apple Pay with FaceID. With TouchID and on the Watch, the verification is tactile, but with FaceID I have to shift my attention to my phone to activate. Most of the time, I see the amount I’m paying in a flash, way too late if it were incorrect.‬

Introducing dark mode

Like a few others this IndieWebCamp I added a dark mode to my website.

With iOS 13 having a dark mode, which toggles with sunrise and sunset if you want it to, I all of the sudden like to have it on. And yesterday in the train, I noticed that my site felt kind of bright.

So this morning I hacked it together in the train back to Amsterdam. I went the dirty way: just have one media-query for determining dark mode, and then target a lot of elements and classes inside that, and set their color to be something different.

The actual implementation was not that hard (@media (prefers-color-scheme: dark)), but I spent the most time of the traintrip figuring out which darker grayscales should replace the brighter grayscales.

One thing to note here was the tip by Steve Schoger I remembered reading: dark modes are not about just inverting colors. Important elements in your UI should still be brighter than others.

Luckily, I don’t have a very complex UI on my weblog, but it’s worth to note that I took some time to make my month overview pages look nice in both modes. Feel free to compare the two.

Note that I currently don’t have a switch on my site to make you choose, but if your browser / OS tell my site which mode it’s in, my site will adapt to that.

‪Ik keek mijn fotoarchief door en zag een vrij dagelijkse selfie met mijn broertje uit 2009. ‘Koningsdag’, had Apple er met grote letters onder gezet. Ik wil het die programmeurs niet aandoen om de bug te melden dat nationale feestdagen zich soms verplaatsen over de jaren.‬

On the topic of scoring in NES Tetris, PAL vs. NTSC

tl;dr: This is nerding out on Tetris scores, and quite frankly, I don't think the conclusion holds. But there are nice tables along the way.

I've been watching Classic Tetris for a few months now, and as a result, I'm also playing it. I am noticeably better after I watched some pro's scoring Tetris after Tetris at level 19, so I keep this pace of watching, playing, watching playing.

There is a problem though: at first I deemed playing at level 18 myself impossible, it's just too fast. Then I noticed how my mind could keep up with the players on the screen, but not with the pieces falling on my screen. Of course, I need more practice, but I have an excuse: I live in Europe.

Turns out old European TVs have a different refresh-rate than Americans. Therefore Tetris on the European PAL systems gets faster in earlier levels than the American NTSC systems. There is a nice article by Tetris Finland about this and other differences between the two versions.

Despite the faster speeds of the PAL version, I found no evidence of the scoring system being different. This means the PAL version is just harder, you just get less points for your hard work. (Yea, I will come back at this.)

I am playing Tetris on a real NES, brought ±15 years ago on a flee market at the local community playground for the insane price of 10 euros. The cartridge of Tetris has cost me more. But to compare myself with the pro's on screen I would have to spend a bit more to import an American NES.

Isn't there a way to calculate the NTSC score based on a PAL score?

Yea, is there a way to calculate NTSC score?

My current, not too impressive high-score on PAL is 174_731 (and yes I will use underscores here). How much is that worth on NTSC?

My first attempt was to look at the maximum scores. Players have been known to 'max out' the game on NTSC. A max out score is a score that is higher than 999_999, at which point the score will freeze on those six nines.

On the PAL version, however, we still have a world record, which is currently set to 758_360 by Joseph Saelee. This video is also a demonstration of how much harder the PAL game gets. (Although Joseph has a talent of making Tetris look easy on all versions.)

With some tweaks in the software you can get Tetris to report past 999_999, so higher scores are known. But for simplicity, let's take the world record and equate it with a NTSC max out score. This gives us ntsc = pal / 758_360 * 999_999, which will give me a NTSC score of 230_406.

But is that accurate?

It's always comparing apples with oranges, but I feel like this formula is a bit too loose. Let's bring in the information of the aforementioned article of Tetris Finland, which gives a nice table that compares the different frame rates, and calculates per level the time it takes, in seconds, to drop 20 spaces. Here is a table with that data:

Level NTSC PAL
9 1.996 sec 1.999 sec
10-12 1.663 sec 1.599 sec
13-15 1.331 sec 1.199 sec
16-18 0.998 sec 0.7998 sec
19-28 0.6655 sec 0.39994 sec
29+ 0.33278 sec as above

Now, the scoring stays the same in both versions, but changes per level. Let's bring that down to a single number per level, let's agree on a perfect score.

The best way of scoring points is to only score tetrises (clear 4 lines at once). Each tetromino is made up of 4 blocks, and the board is 10 blocks wide. A perfect score would be if the Random Number Generator (RNG) gives us only lines and we can stand them up over the full width of the board, resulting in a tetris and an all-clear board each 10 pieces. This is not really achievable, but this would be the best score possible.

According to the Tetris Wiki we get 1200 * (level + 1) for each tetris, and scores are calculated based on the level after the line clear. Let's ignore push-down points. Let's also say that if the drop speed goes below 0.5 sec for 20 spaces the game is over (this makes levels 29 for NTSC and 19 for PAL the kill screens).

Then there is the concept op the start level. When you start at level 1, you go up to level 2 after 10 lines. But when you start at level 18, you get 130 lines before going to level 19, after which you get a new level ever 10 lines again. The Tetris Wiki gives the formula of "(startLevel × 10 + 10) or max(100, (startLevel × 10 - 50)) lines, whatever comes first". This means 100 lines for levels 9-15, then 110, 120 and 130 for 16, 17 and 18.

So I wrote this odd-looking piece of Javascript (because it's my day off and I can do whatever) to list out the various perfect scores for the various level-starts.

const killscreen = 19 // or 29

tetrisScore = level => 1200 * (level + 1)

startlevelLines = level => Math.min(
  (level * 10 + 10),
  Math.max(100, (level * 10 - 50))
)

scoreForLevel = (level, lines) => ({
  score: (Math.floor(lines / 4) * tetrisScore(level)),
  restlines: lines % 4
})

restlevelScore = (level, rest) => {
  if (level >= killscreen) return tetrisScore(level)
  const {score, restlines} = scoreForLevel(level, 10 + rest)
  return score + restlevelScore(level + 1, restlines)
}

perfectScore = level => {
  const {score, restlines} = scoreForLevel(level, startlevelLines(level))
  return score + restlevelScore(level + 1, restlines)
}

const levels = [...Array(killscreen).keys()]
levels.map(level => console.log(`| ${level} | ${perfectScore(level)}`))

I was kind of surprised by the results: as you can see, the world record by Joseph is higher than the perfect score. This is because he had a 100% tetris rate, burned one line in level 18 for 760 points, then tetrised into level 19, and then made a few singles and doubles in level 19. My definition of 'kill screen' seems too strict, but at least it's even on both sides of the table.

Start level NTSC perfect PAL perfect
0 1_332_000 588_000
1 1_334_400 590_400
2 1_340_400 596_400
3 1_348_800 604_800
4 1_360_800 616_800
5 1_375_200 631_200
6 1_393_200 649_200
7 1_413_600 669_600
8 1_437_600 693_600
9 1_464_000 720_000
10 1_478_400 728_400
11 1_454_400 710_400
12 1_462_800 712_800
13 1_432_800 688_800
14 1_435_200 685_200
15 1_399_200 655_200
16 1_429_200 685_200
17 1_461_600 717_600
18 1_497_600 753_600
19 1_536_000
20 1_578_000
21 1_622_400
22 1_670_400
23 1_720_800
24 1_774_800
25 1_831_200
26 1_891_200
27 1_953_600
28 2_019_600

Given that my high score was a level-5-start score of 174_731, I should use ntsc = pal / 631_200 * 1_375_200, giving me a NTSC score of 380_687, a lot more than my previously calculated 230_406. But is this fair now?

Score per second

The table above is not by any means a fair comparison. It does account for the higher scoring potential in NTSC, but it still compares levels regardless of the speed they are played at. Let's combine the previous two tables into one.

So in the PAL version, you get less points, but also less time to think about how to score them. In that regard, the PAL version is harder, and the points should be worth more.

In the next table, I've taken the perfect score per level, and divided it by the thinking time you have for it (the seconds of the earlier table times 240, the number of lines before transition you get when you start in level 29). The result is a series of numbers that say how 'easy' it was to get that number of points.

Start level NTSC score sec / 20 lines modifier
9 1_464_000 1.996 3.0561122244
10 1_478_400 1.663 3.7041491281
11 1_454_400 1.663 3.6440168370
12 1_462_800 1.663 3.6650631389
13 1_432_800 1.331 4.4853493614
14 1_435_200 1.331 4.4928625094
15 1_399_200 1.331 4.3801652893
16 1_429_200 0.998 5.9669338677
17 1_461_600 0.998 6.1022044088
18 1_497_600 0.998 6.2525050100
19 1_536_000 0.665 9.6240601504
20 1_578_000 0.665 9.8872180451
21 1_622_400 0.665 10.1654135338
22 1_670_400 0.665 10.4661654135
23 1_720_800 0.665 10.7819548872
24 1_774_800 0.665 11.1203007519
25 1_831_200 0.665 11.4736842105
26 1_891_200 0.665 11.8496240602
27 1_953_600 0.665 12.2406015038
28 2_019_600 0.665 12.6541353383
Start level PAL score sec / 20 lines modifier
9 720_000 1.999 1.5007503752
10 728_400 1.559 1.9467607441
11 710_400 1.559 1.8986529827
12 712_800 1.559 1.9050673509
13 688_800 1.199 2.3936613845
14 685_200 1.199 2.3811509591
15 655_200 1.199 2.2768974145
16 685_200 0.799 3.5732165207
17 717_600 0.799 3.7421777222
18 753_600 0.799 3.9299123905

This would say an NTSC max-out on a level 18 start is 999_999 / 6.25250501, so has a difficulty of 159_935. The world record on PAL is 758_360 / 3.9299123905, so has a difficulty of 192_971. To me this feels believable, because Joseph has had many beyond-max-out games. We don't know their scores, because the game does not tell us, but their difficulty might also approach 200k.

And my score? Well, as I mentioned somewhere it was a level-5-start score, and as you can see in the first table: there is not much difference between level 9 on PAL and NTSC, and level 5 is not even listed. I should really stop whining and just practice more.

Apples and oranges

If you actually read the article by Tetris Finland you already would know: the speed is not the only difference. There are also differences in the way DAS works in PAL vs NTSC. The article concludes that these games are therefore very different, so different that you might consider them entirely different titles, despite looking the same.

It was fun figuring out these numbers and formula's, but in the end, you really can't compare the two. Gotta fix myself an NTSC somewhere if I want to compare my progress to the pro's.

Note that this difficulty number is a thing I invented in this post, and it is in itself not comparable to Tetris scores. But you can compare it to other difficulty numbers, if you calculate them the same way. Actually, I don't really think this whole thing is reliable at all, but I didn't want to throw a whole morning of calculating and writing out of the window. Some of the tables bear more value than others.

When writing large numbers and decimals, Dutch and English use the complete opposite characters to notate them. So a million times pi is written as "3.141.592,6535" in Dutch and "3,141,592.6535" in English. I find both very confusing at times, especially the comma in both cases. Wondering if I should adopt Ruby's underscore for this: "3_141_592.6535".

Meer laden